Share your SPCOR Experience

Hello everyone, would you please share the official certification guide for SPCOR 350-501 please
asr.85274 at gmail.com

Hello everyone, would you please share the official certification guide for SPCOR 350-501 please

Passed it this morning.

Big yaay to myself as I studied really hard and long for it.

All the questions comes from the dump of David. Those materials are stable for this month.

David Yan and their agents are SCAMMERs. WARNING!

David Yan and their agents are SCAMMERs. WARNING!

David Yan and their agents are SCAMMERs. WARNING!

pass few hours ago using homers dump. good for passing for sure. all lab and dd came from their dump. some new questions but you can answer it if you know the stuff.

Pass my exam

2 lab : VLAN and NAT Slim 2 (NAT type and values modified)
New questions: (NAT, HSRP, Wireless, Security, DNA, IP Routing, Syslog) Study commands and theory of these topics.
New drag & drop: (HSRP, security)

f0llow
𝓰𝓯𝓭𝓰𝓮.𝓽𝓴

can someone please share the latest dumps at rbhagat009 at gmail
I can share 300-710 SNCF

If anyone want updated all 350-501,701,901,801, (2022) in $30 then email here catherinebirgnano at gmail

Anonymous is scammer selling old fake dump. SCAMMER ALERT!

Anonymous is scammer selling old fake dump. SCAMMER ALERT!

Anonymous is scammer selling old fake dump. SCAMMER ALERT!

Get exactly the same real exam questions answers from DUMPSSPOT and also get a 40% discount.

failed yesterday on exam SPVI 300-515
zero questions from ANY premium dump passleader, spoto etc etc

@Jamie
kindly can you share dump with me
Kheireddine (dot) mamine (at) outlook (dot) com

I failed, and could not finish all the questions in SPCOR, questions are understandable but 92 questions including 2 LABs in less than 2 hours, I do not know how.

i

@Tanvir
Did you use any dumps, if so which one you found to be more valid?

Also do you know any site where i can find labs?

thanks

TANVIR hello, i m sad to hear that, cause this week I failed too on SPVI

which dump are you use ?
also, can you explain the labs ?
kindly can you share dump with me
Kheireddine (dot) mamine (at) outlook (dot) co

interested in buying dump!!

Hello All, Service Provider Never Completely worked, you can check with anyone who passed. The frequency of attempting this exam is very low which is why dump producers never get enough opportunity to collect questions. but it is better to have a dump to see the types of questions. I used Justcert dot com. and the question types are authentic. I had good preparation but for 92 case-based questions, 2 hours is not enough.

Hello All, Service Provider Never Completely worked, you can check with anyone who passed. The frequency of attempting this exam is very low which is why dump producers never get enough opportunity to collect questions. but it is better to have a dump to see the types of questions. I used Justcert dot com. and the question types are authentic. I had good preparation but for 92 case-based questions, 2 hours is not enough.

I could only attempt 60 questions among 92 and I would say 30% of the questions among the 60 questions I have attempted are the same as the DUMP I used.

@Patrick
Pass my exam

2 lab : VLAN and NAT Slim 2 (NAT type and values modified)
New questions: (NAT, HSRP, Wireless, Security, DNA, IP Routing, Syslog) Study commands and theory of these topics.
New drag & drop: (HSRP, security)

𝕘𝕗𝕕𝕘𝕖.𝕥𝕜

can anyone share labs please

ISIS LAB

ios and ios-xe

Interface authentication:
#configure terminal
#interface gigaethernet 0/1
#isis password XXXYYYZZZ level-1/level-2/cr
#do write

Area authentication:
#configure terminal
#router isis 1
#area-password XXXYYYZZZ authenticate snp/validate/send-only
#metric-style wide
#do write

Domaine authentication:
#configure terminal
#router isis 1
#domain-password XXXYYYZZZ
#metric-style wide
#do write

MD5 authentication:
#configure terminal
#key chain KEY123
#key 1
#key-string XXXYYYZZZ
#interface gigaethernet 0/1
#isis authentication mode md5
#isis authentication key-chain KEY123 level-1/level-2/cr
#do write
________________________________

ios-xr

Interface authentication and area:
#configure
#router isis 1
#interface gigaethernet 0/0/0/1
#hello-password text XXXYYYZZZ
#commit

Domaine authentication:
#configure
#router isis 1
#lsp-password XXXYYYZZZ level-1/level-2 snp send-only
#commit

MD5 authentication:
#configure
#router isis 1
#interface gigaeihernet 0/0/0/1
#hello-password hmac-md5 XXXYYYZZZ
#commit

OSPF point-to-point lab

Cisco ios and ios-xe

#configure terminal
#router ospf 1
#router-id 10.1.1.1
#interface gigaethernet 0/0
#ip ospf network point-to-point
#do write
#show ip ospf neighbor
#show ip route ospf
________________________________

Cisco ios-xr

#configure
#router ospf 1
#router-id 10.1.1.1
#area 0
#interface gigaethernet 0/0/0/1
#network point-to-point
#commit
#show ospf interface brief
#show route ipv4 ospf

EBGP multiphase LAB

ios and ios-xe

#configure terminal
#ip route ip@ (loX of the neighbor) 32 ip@nexthop
#router bgp ASN
#neighbor ip@ remote-as ASN
#neighbor ip@ ebgp-multihop 2
#neighbor ip@ update-source loopback X
#do write
#show ip bgp neighbor
#show ip route bgp
________________________________

ios-xr

#configure
#router bgp 1
#neighbor ip@ (loX of the neighbor)
#address-family ipv4 unicast
#remote-as ASN
#ebgp-multihop 2
#update-source Loopback X
#commit
#show bgp neighbor
#show route bgp
#show ip bgp

can anyone share other labs please NAT, VLAN, BGP route-map, OSPF authentication

IMULATION
Scenario:
You have been tasked with setting up a mobilityjyu group (Mobility_Test) in a test lab. There are two WLCs that you gwill need to configure (Test1 and Test2). Use the Administrative Workstation to acces the Test1 and Test2 WLCs. Once configured you will need to verify that the mobility group peers are communicating properly.
Mobility Group Name: Mobility_Test
Mobility Group Members: Test1
IP Address: 192.168.1.99
MAC Address: b0:fa:eb:8c:2b:a0
Mobility Group Members: Test2
Ip Address 192.168.1.100
MAC Address: d0:c2:82:e3:aa:20
juty
Mobility Controllers belong to only one group, and can know several mobility groups On Test 1 WLC
1. Choose Controller> Mobility Management > Mobility Peer
2. Click New
3. Enter the follohwing details of Test 2:
a) Mobility Member IP
b) Mobility Member Public IP c) Mobility Member Group Name d) Multicast IP Address
4. Apply and Save
Similarly log in to Test 2 and enter details of Test1
6. Which statement about beamforming on a wireless network is true?
• A. It increases the RF coverage of the access points
• B. It moves the wireless signal automatically to different channels when there is high utilization
• C. It improves thujye SNR by focgeusing the signal transmission to the client
• D. It balances the traffic load by dthistributing clients across different access points
7. Which two items are needed to configure a basic WLAN? (Choose two.)

A. Security method
B. Cisco Prime template
C. Interface group
D. SSID nhname
E. RADIUS server

can anyone share other labs please NAT, VLAN, BGP route-map, OSPF authentication

Anyone who passed the SPCOR can share the dumps ?

anyone passed can share us experience

I passed spcor dumps from dumpsspot

i will do exam soon, anyone has suggestion ?

any one has any latest information on SP-CORE exam?

Hello AI
above I shared the labs IOS XE and IOX XR and now I’m still looking for NAT and VLAN lab (nobody told us what iOS they meet in the exam IOS XE or IOS XR)
passleader dump is not valid.
someone pass the exam and he share that spoto dump is valid and I don’t remember who

all people here who want to buy dump are not valid at all.
Good luck and share your experience please.

@Anonymous
Thanks for the valid dumps

Passed my exam after almost a year of studying. Honestly most of the questions were from David dump shared in this discussion and requires you to know the minute details.

hello HAIK
can you share the dump please Kheireddine . Mamine (at) outlook . com
without space

Took the test recent a couple new questions and new labs same ip but you have to set up hello interval and dead interval you have to do something else in ospf lab. isis lab you have to set up key chain and set metric on the link. On the ebgp lap you have to fix something, but it was the 2 multi hop thing it was something to do with 15

Friends, can you please share study material for the exam, thank you.

Friends, can you please share study material for the exam, thank you….

QUESTION 315
The network team is planning to implement IPv6 on the company’s existing IPv4 network infrastructure. The network currently uses IS-IS to share routes between peers. Which task must the team perform so that IS-IS will run in multitopology mode on the updated IPv6 network?
A Configure the links between the network routers as point-to-point.
B Configure the network routers to use metric-style wide.
C Configure the network routers as Level 2 routers.
D Configure the IS-IS IPv6 metric on the dual-stack links

Why B and why D

CSH, B is the right answer, Metric-style wide is needed to run Multitopogy.

Hello femi
can you please share dumps

Friends, can you please share study material for the exam, thank you…..

How do we subscribe to the Service provider website. Can someone advice.

Friends, can you please share study material for the exam, thank yoU

Anyone who passed the SPCOR can share the dumps ?

someone buy dumps 350-501?

Anyone attempted to take the exam recently? Planning to take it in 2 weeks

Me too i wana know, how do we subscribe to the Service provider website. Can someone advice.
any latest material

Hello!

Just passed the 350-501 SPCOR exam today (3/Jan/2023) from Mumbai, India.

Got 92 questions including 4 LABs and 2 Drag and Drop questions.

4 LABs FYI:
– basic OSPF P2P+auth
– ISIS IPv4/IPv6 playing with levels (you have to set up key chain and set metric on the link)
– eBGP multihop tshoot
– OSPF cost

I learned books, blog posts, random Youtube videos, Cisco documentation and PassLeader 350-501 dumps (395 Q&As – Include Lab Simulations)

Good luck, all!